Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Polishing Plastic Knobs
#15

Hello,

My two cents worth -- I've tried several of the options listed with decent results. But, was told to try 3M Imperial Hand Glaze - which can be bought at various auto parts stores. (found mine at CarQuest). It works better than anything else I've tried and by a good margin. It's a heavy liquid. Put a pretty heavy coating on and rub throughly, let dry and then buff. One more thin coat, dry and buff and the shine is really nice. Doesn't take a lot of rubbing, but needs the two coats.

Joe

"Ignorance is bliss...'til you have to fix a radio..."


Messages In This Thread
Polishing Plastic Knobs - by Owells - 07-08-2008, 06:04 PM
[No subject] - by Steve Davis - 07-08-2008, 07:45 PM
Re: Polishing Plastic Knobs - by Syl - 07-08-2008, 08:01 PM
Brasso - by BILL - 07-12-2008, 11:03 AM
[No subject] - by englishradioman - 07-12-2008, 06:56 PM
[No subject] - by Texasrocker - 07-23-2008, 09:54 PM
[No subject] - by Chuck Schwark - 07-23-2008, 10:01 PM
[No subject] - by exray - 07-24-2008, 06:52 AM
[No subject] - by Terry Judkins - 07-24-2008, 08:39 AM
[No subject] - by Syl - 07-25-2008, 10:15 AM
[No subject] - by englishradioman - 07-25-2008, 04:25 PM
[No subject] - by etech - 08-01-2008, 12:58 PM
[No subject] - by englishradioman - 08-01-2008, 03:20 PM
Re: Polishing Plastic Knobs - by Guest - 02-07-2009, 01:31 PM
Re: Polishing Plastic Knobs - by jayoungs - 02-09-2009, 09:53 AM
Re: Polishing Plastic Knobs - by radiorich - 02-15-2009, 04:07 PM



Users browsing this thread: 1 Guest(s)