11-03-2014, 11:36 AM
Before
[Image: http://www.pbase.com/david_3/image/15812...iginal.jpg]
After
[Image: http://www.pbase.com/david_3/image/15812...iginal.jpg]
I haven't quite figured out how I'm going to secure the electrolytic capacitors in the middle of the chassis. They are much bigger than I thought they would be, and combined with the large resistors connected to positive end, it makes for a rather big package. They wouldn't fit in the original location. Right now, they are hanging from a zip tie (which you can't see in this picture), and are fairly stable. But I think I can do better.
This is my first attempt at recapping, so I'm just happy it works.
[Image: http://www.pbase.com/david_3/image/15812...iginal.jpg]
After
[Image: http://www.pbase.com/david_3/image/15812...iginal.jpg]
I haven't quite figured out how I'm going to secure the electrolytic capacitors in the middle of the chassis. They are much bigger than I thought they would be, and combined with the large resistors connected to positive end, it makes for a rather big package. They wouldn't fit in the original location. Right now, they are hanging from a zip tie (which you can't see in this picture), and are fairly stable. But I think I can do better.
This is my first attempt at recapping, so I'm just happy it works.
