Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

635 Tombstone
#1

Hi Guys, This question has probably been asked 100 times , but I have a question about wattage ratings on some of the resistors in this chassis. resistor # 59A 70k is a bit bigger than others in this chassis so I was wondering if anyone  thought the 1watt resistor would be fine. Also # 57 a 4k resistor is much bigger than the 59a resistor, anyone know what wattage I should use for it? Here is a link  to a schematic (http://www.nostalgiaair.org/Resources/814/M0013814.htm ) for it and I took a pic of the chassis, not real sharp pic, if you need better let me know.
The big yellow one on the bottom is #57 and a little ways up with masking tape marked 70k on it is 59A.
Thanks for any help, Warren
[Image: http://i1348.photobucket.com/albums/p721...qjltjf.jpg]


Messages In This Thread
635 Tombstone - by Warren - 04-12-2015, 05:49 PM
RE: 635 Tombstone - by klondike98 - 04-12-2015, 06:06 PM
RE: 635 Tombstone - by Warren - 04-12-2015, 09:02 PM
RE: 635 Tombstone - by Warren - 04-20-2015, 01:19 AM
RE: 635 Tombstone - by Ron Ramirez - 04-20-2015, 06:11 AM
RE: 635 Tombstone - by Warren - 04-20-2015, 03:09 PM
RE: 635 Tombstone - by Warren - 04-22-2015, 10:41 PM
RE: 635 Tombstone - by Warren - 04-23-2015, 10:12 PM
RE: 635 Tombstone - by Steve Davis - 04-23-2015, 10:22 PM
RE: 635 Tombstone - by Warren - 04-24-2015, 11:52 PM



Users browsing this thread: 1 Guest(s)