01-27-2016, 01:36 AM
Steve, there's no such thing as being embarrassed while trying to help. Mine is 4 gang.
I did notice something stupid i did - the third gang was assembled in "reversed". I corrected it but i still get a continuity reading of 1.2 meaning grounded to the chassis. the plates are better aligned and the shaft does not float like it did. Still no reception. 3 Am in the morning work caused the first problem so i'm leaving this for tomorrow. I get obsessed working on this stuff and do more harm than good. I don't know why the 3rd gang is grounded because the other 3 sides are not and i tried to lock it under the rotor shaft, plus the plates are not touching - proved that when i rotate up so top and bottom are not overlapping. Well there's tomorrow. at least that is a problem that had to be fixed. Rich
I did notice something stupid i did - the third gang was assembled in "reversed". I corrected it but i still get a continuity reading of 1.2 meaning grounded to the chassis. the plates are better aligned and the shaft does not float like it did. Still no reception. 3 Am in the morning work caused the first problem so i'm leaving this for tomorrow. I get obsessed working on this stuff and do more harm than good. I don't know why the 3rd gang is grounded because the other 3 sides are not and i tried to lock it under the rotor shaft, plus the plates are not touching - proved that when i rotate up so top and bottom are not overlapping. Well there's tomorrow. at least that is a problem that had to be fixed. Rich
