12-24-2016, 02:40 PM
Making progress on the E-200-C. I had a broken RF selector switch which is why I had no real output. Fixed that and continued to replace bad out of tolerance resistors and wax caps. Now I ran into a problem of my own doing. Replaced the old resistors under the 6AU6 tube, but to do so I had to disconnect several points. I thought I had good photos of all areas but I neglected one and that connection has me stumped. It is a bare wire lead from the lowest wafer in the stack located between band coils B and C. This lead runs up through the next two wafers and connects somewhere in the tube socket area. I just cant determine where. Anyone have theirs open that can send me a photo?
