01-10-2017, 11:28 PM
< Where would I read that on the radio?
At the bottom diode plate of the 75 tube.
OBTW the sm that Audin posted is missing the spring that centers the vane. I should look like this one.
With out the spring you would need a magnet to center the vane like the older models use. The screw
at the back adjusts the vane position when the spring is in place. Without it it does nothing.
At the bottom diode plate of the 75 tube.
OBTW the sm that Audin posted is missing the spring that centers the vane. I should look like this one.
With out the spring you would need a magnet to center the vane like the older models use. The screw
at the back adjusts the vane position when the spring is in place. Without it it does nothing.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
