04-05-2017, 11:36 AM
+1 to what Ron said.
Be sure to spray a couple of coats of clear first. This will make sanding the toner off the top of the beads easier. Look here: http://philcoradio.com/phorum/showthread...284&page=2 (scroll down about half way). This is the way I add the accent to the columns on my reproduction cabinets.
Steve
Be sure to spray a couple of coats of clear first. This will make sanding the toner off the top of the beads easier. Look here: http://philcoradio.com/phorum/showthread...284&page=2 (scroll down about half way). This is the way I add the accent to the columns on my reproduction cabinets.
Steve
M R Radios C M Tubes
