05-26-2017, 11:29 AM
Hi Stephen,
You want to look at the schematics and service data for the Model 112 above serial number 174001 (which is the 2-47 version). I don't have access to any of my stuff as I'm at work on lunch, but I believe the data on Rider's Philco page 2-38 is correct for your set. Almost everything above that is for the early 112 with 2-45 tubes, below S/N 174001 - the exception being, as you mentioned, the under-chassis drawing at the bottom of Philco page 2-36.
It's hard to make out in the scan, but you're right - the numbering scheme of the terminals are different in the 2-36 drawing than the 2-38 drawing. However, I am pretty sure that the capacitor layout in 2-38 is correct.
I will look at my notes when I get home to confirm, and to be able to properly answer your questions.
You want to look at the schematics and service data for the Model 112 above serial number 174001 (which is the 2-47 version). I don't have access to any of my stuff as I'm at work on lunch, but I believe the data on Rider's Philco page 2-38 is correct for your set. Almost everything above that is for the early 112 with 2-45 tubes, below S/N 174001 - the exception being, as you mentioned, the under-chassis drawing at the bottom of Philco page 2-36.
It's hard to make out in the scan, but you're right - the numbering scheme of the terminals are different in the 2-36 drawing than the 2-38 drawing. However, I am pretty sure that the capacitor layout in 2-38 is correct.
I will look at my notes when I get home to confirm, and to be able to properly answer your questions.
--
Ron Ramirez
Ferdinand IN
