06-03-2017, 03:42 AM
< I mean it has nothing to do with X sub L? Also, should there be a couple of fuses? One in the line and one at the power supply output?
Correct. Inductance is measured in Henrys. Resistors have very little inductance (wire wound) which can be a issue at RF but in power supply filtering it's a non issue. With that being said you'll need to increase the value of the three capacitors to 33mfd or so to eliminate 60cy hum. Remove #54 from the circuit.
You can add fuses 1A to the ac line and 150ma to the center tap of the HV winding.
Correct. Inductance is measured in Henrys. Resistors have very little inductance (wire wound) which can be a issue at RF but in power supply filtering it's a non issue. With that being said you'll need to increase the value of the three capacitors to 33mfd or so to eliminate 60cy hum. Remove #54 from the circuit.
You can add fuses 1A to the ac line and 150ma to the center tap of the HV winding.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
