07-18-2017, 12:25 PM
I've been working on this one for a while and I have the same problem and that is identifying grids on tubes.
http://www.nostalgiaair.org/pagesbymodel...012465.pdf
In the procedure calls for connecting to the Converter grid through a .05 cap to the signal gen? Now the paperwork lists the 12BE6 as the OSC Converter
Pin #1 Ocs grid, or 6,7. ???
Does it matter the position the tuner is paper work does not say?
Thanks Eric
http://www.nostalgiaair.org/pagesbymodel...012465.pdf
In the procedure calls for connecting to the Converter grid through a .05 cap to the signal gen? Now the paperwork lists the 12BE6 as the OSC Converter
Pin #1 Ocs grid, or 6,7. ???
Does it matter the position the tuner is paper work does not say?
Thanks Eric
