08-27-2017, 03:55 PM
Hi Bob,
You can solder a 1k resistor across the open coil or I would suspect you could just solder a jumper across it also. Depending on what style sm you have, some are not too difficult to rewind and make functional again.
You can solder a 1k resistor across the open coil or I would suspect you could just solder a jumper across it also. Depending on what style sm you have, some are not too difficult to rewind and make functional again.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
