10-28-2017, 09:43 AM
Hi,
> a 1.0 M, but its metering around 1.8M. That can't be right?
Yup. I usually don't bother with what the diagram sez just what the color code sez it's suppose to be. As long as it looks to be original not one that has been replaced before. 20% tolerance is what it has in it.
>where is the AVC on the schematic?
It starts @ 3 and goes over to 15 and so on. Ends up over by the volume control.
> a 1.0 M, but its metering around 1.8M. That can't be right?
Yup. I usually don't bother with what the diagram sez just what the color code sez it's suppose to be. As long as it looks to be original not one that has been replaced before. 20% tolerance is what it has in it.
>where is the AVC on the schematic?
It starts @ 3 and goes over to 15 and so on. Ends up over by the volume control.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
