11-17-2017, 05:30 PM
Hi Brian,
> i have no idea what tolerance i should apply to any of them
20% was pretty standard back then in radios. Test equipment is a different story, they can have 1% jobs in things like volt/ohm meters.
> or their wattage rating if i choose to replace them.
Physical size matters most of them are going to be 1/2 watt but larger the one can be higher in wattage rating. If you are uncertain about a particular one just ask.
GL
> i have no idea what tolerance i should apply to any of them
20% was pretty standard back then in radios. Test equipment is a different story, they can have 1% jobs in things like volt/ohm meters.
> or their wattage rating if i choose to replace them.
Physical size matters most of them are going to be 1/2 watt but larger the one can be higher in wattage rating. If you are uncertain about a particular one just ask.
GL
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
