11-12-2017, 07:09 PM
with low utility mains simulated..which actually happens more than people know,,,, utility sags and such......
40watts/95vac= .421A
to size the fuse its .421 x 1.20= .505A
thats where the half amp came from... prob they used the voltage low voltage value on the prints.
115v is nominal
1/2A on both but its possible the fuse would be to senstive so 1A as said is a better choice.
40watts/95vac= .421A
to size the fuse its .421 x 1.20= .505A
thats where the half amp came from... prob they used the voltage low voltage value on the prints.
115v is nominal
1/2A on both but its possible the fuse would be to senstive so 1A as said is a better choice.
