[mikethedruid]

I finally have gotten all the various bits and pieces to finish the rebuild of the speaker. I made a mounting plate for the Hammond P-T125E output transformer. Today I finally got to put it all together. I used extra heat shrink over the fine wires that go to the voice coil where they have to pass through the little clip inside the basket. The leads from the hum bucker coil are a little long, and will be dressed later, after testing, when I have made sure they are not connected backwards. Here are pictures of the whole thing.
[Image: https://66.media.tumblr.com/b5464c384e0f...bd2de9.jpg]

[Image: https://66.media.tumblr.com/2628d7987c7e...158c8a.jpg]

[Image: https://66.media.tumblr.com/428f61e40d3c...bc8128.jpg]

[Image: https://66.media.tumblr.com/883dd43c51b5...050d93.jpg]

[Image: https://66.media.tumblr.com/d84ee68405c8...a7b61a.jpg]