[garyh1]

I removed the 4mfd electrolytic tonight and retuffed it with a new cap. Now I have no volume. I am confused by the fact that stamped on the housing there is a 1-4 mfd. Does this mean there should be a 4 and a 1 mfd cap inside. According to the parts listing there should be just a 4. Something else I don't understand is the fact that the parts list shows that capacitor can number 29 should have three ones and a two inside although there are only three attatchment points on the can. Could it be that one of the 1 mfd caps should actually be housed with the can numbered 103 along with the 4 mfd. I'm not good at reading schematics yet but from what I can tell this is possible. Any help would be greatly appreciated. Thanks,Gary