10-26-2022, 06:18 PM
Hi: First time poster, kinda sorta newbie. I hope my question makes sense. It involves attaching the speaker plug wires to the output transformer. I had the speaker reconed. I know there were some connections inside the basket when I sent it, but only the 2 voice coil wires when returned. So......
If the bottom of the transformer as in the picture (part #, 2766J, oriented correctly, with the mounting holes at the top and bottom), where do I connect the field coil (and tap) and voice coil wires? Don't know if it helps, but the top two tabs have a resistance of 450ohms (Imp. 16K), the tabs on the left side have a resistance of 215ohms (Imp. 2.8K). The bottom and right side tabs test open. What plug wire goes where? Thank you so much for any assistance.
If the bottom of the transformer as in the picture (part #, 2766J, oriented correctly, with the mounting holes at the top and bottom), where do I connect the field coil (and tap) and voice coil wires? Don't know if it helps, but the top two tabs have a resistance of 450ohms (Imp. 16K), the tabs on the left side have a resistance of 215ohms (Imp. 2.8K). The bottom and right side tabs test open. What plug wire goes where? Thank you so much for any assistance.
