12-23-2023, 07:35 PM
Hi and welcome to the Phorum,
Here's the manual for the turntable more or less. Yours looks like an AT60 the closest thing I could find is for an AT6. https://all-guidesbox.com/download/12476...al-14.html
As for your unknown wire will need to know where the end or ends go to figure out that puzzle.
One thing you can do is remove the pickup head, there's collar that you loosen right behind it and then carefully pull the head out. There should be a 3 pin socket. Two of the connections are connected to the input of the amp the other is connected to the shield of the audio cable. If all is working properly you should be able to touch either of the two input connections and hear a loud 60cy buzz from the speaker when the volume is advanced. If not check the wiring and mute switch.
GL on your new adventure!
Here's the manual for the turntable more or less. Yours looks like an AT60 the closest thing I could find is for an AT6. https://all-guidesbox.com/download/12476...al-14.html
As for your unknown wire will need to know where the end or ends go to figure out that puzzle.
One thing you can do is remove the pickup head, there's collar that you loosen right behind it and then carefully pull the head out. There should be a 3 pin socket. Two of the connections are connected to the input of the amp the other is connected to the shield of the audio cable. If all is working properly you should be able to touch either of the two input connections and hear a loud 60cy buzz from the speaker when the volume is advanced. If not check the wiring and mute switch.
GL on your new adventure!
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
