10-18-2005, 08:33 AM
Nothing special - just the typical replace all capacitors and electrolytics. Re-build any bakelite block caps and metal can caps.
Check all resistors for out of tolerance values (+/-20%) and replace as needed.
Check all RF and OSC coils for continutiy - also IF and AF transformer windings.
Check bandswitch contacts and clean if needed.
Then do your dim-bulb or vaiac tests.
Check all resistors for out of tolerance values (+/-20%) and replace as needed.
Check all RF and OSC coils for continutiy - also IF and AF transformer windings.
Check bandswitch contacts and clean if needed.
Then do your dim-bulb or vaiac tests.
Chuck Schwark,
The Philco Repair Bench
[Image: http://www.philcorepairbench.com/images/philog3tiny.gif]
http://www.philcorepairbench.com
