03-19-2012, 12:03 PM
Hi to all!
Been lurking for quite awhile reading all the great posts when I finally have a question for the experts
While recapping C134, 134A I noticed the cap design doesn't match the schematic.
There are three wires from the metal canned cap mounted on top of chassis wired below.
Brown, red and White/ Black stripe wires and common ground to the metal can itself.
Attached is a diagram I made up to more easily see the problem.
Anyone found this additional cap in their rebuild?
camman
Been lurking for quite awhile reading all the great posts when I finally have a question for the experts
While recapping C134, 134A I noticed the cap design doesn't match the schematic.
There are three wires from the metal canned cap mounted on top of chassis wired below.
Brown, red and White/ Black stripe wires and common ground to the metal can itself.
Attached is a diagram I made up to more easily see the problem.
Anyone found this additional cap in their rebuild?
camman
