07-02-2013, 10:20 AM
Hi All;
I found out that the plastic dial face doesn't twist off like the other Dial faces, but it has two set screws that I did not see.. They were hidden from my sight, when I looked at it, they revealed themselves after taking off the front four screws and turning the Dial..
I now have the Variable Capacitor off and can clean the top of the chassis..
I also found out that the top of the IF cans can indeed come off from the top, as it has a large "C" clip holding it on..
Can it safely be taken off and still put back on and hold the can in place ??
THANK YOU Marty
I found out that the plastic dial face doesn't twist off like the other Dial faces, but it has two set screws that I did not see.. They were hidden from my sight, when I looked at it, they revealed themselves after taking off the front four screws and turning the Dial..
I now have the Variable Capacitor off and can clean the top of the chassis..
I also found out that the top of the IF cans can indeed come off from the top, as it has a large "C" clip holding it on..
Can it safely be taken off and still put back on and hold the can in place ??
THANK YOU Marty
