Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

One of my "dream" radios finally found
#1

A 1936 General Electric model E-101

"Colorama"

Top of the line table model offered by GE in 1936, with 10 tubes and 3 bands! It's housed in a HUGE cabinet measuring 16" wide, 21" tall and 12" deep. GE Pioneered metal tubes, and they were still relatively new in '36. The radio features all its original tubes, save for two (the glass 6L6 will be replaced with a metal one). This is a rare one year only model that used a saturable reactor and seven #40 colored dial lights (4 red and 3 green) that changes the color of the dial. When a station is strong and optimally tuned in, the dial turns green. In between stations, it turns red. I was very fortunate that none of the coils were open on this radio...something very common. Especially in the saturable reactor.

   

   

   

   

   

Greg V.
West Bend, WI
Member WARCI.org
#2

Nice!

Where did you find it?

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

An antique store online. Been looking for one of these for over 3 years. There was one on eBay last year that sold for $350. I got this one (unrestored) for less than a third of that. 

Greg V.
West Bend, WI
Member WARCI.org
#4

   

I have this full page ad for the focused tone colorama from a December 1936 issue of the Saturday Evening Post framed above the radio. It features Bing Crosby, proving he wasn't just partial to Philcos! Icon_smile

Greg V.
West Bend, WI
Member WARCI.org
#5

   
Here's a picture of the chassis showing the bank of colored lights. I bought colored red and green vinyl sleeves to slip over the new #40 bulbs from Mouser. They work great and give excellent color contrast.

Greg V.
West Bend, WI
Member WARCI.org
#6

Interesting set; thanks for the pictures and descriptions.  The colorama sets are ones I haven't paid too much attention to until a few months ago, and your pictures nicely illustrate how the dial changes color.

Those red and green vinyl sleeves sure add nice color to the bulbs.  Too bad the colored LED replacement bulbs from places like Pinball Life don't seem to come with a screw (type 40) base:


http://www.pinballlife.com/index.php?p=product&id=1883

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#7

(02-28-2016, 02:44 AM)Eliot Ness Wrote:  Interesting set; thanks for the pictures and descriptions.  The colorama sets are ones I haven't paid too much attention to until a few months ago, and your pictures nicely illustrate how the dial changes color.

Those red and green vinyl sleeves sure add nice color to the bulbs.  Too bad the colored LED replacement bulbs from places like Pinball Life don't seem to come with a screw (type 40) base:


http://www.pinballlife.com/index.php?p=product&id=1883

 It's too bad, but you could not use those LED bulbs with the tuning indication system that these G.Es used, maybe with a regular 28 volt tuning light like Rogers and some other makes used but not these. It's one feature I wish that the Canadian G.Es models had, but most seem to have used clones of Canadian RCA chassis, but in a different cabinet.
Regards
Arran
#8

greg
sharp looking GE 
love the dial and lights Icon_clap Icon_clap

sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#9

Great find especially since it was on your wish list!
Icon_thumbup Icon_thumbup Icon_thumbup
#10

Glad you got it. I have a couple of specimens same as the one atop the refrigerator in my childhood days, they still play but mom is long gone. I didn't finish either one to vintage, but cleaned and completely mechanically/electrically restored the sets. Not much to listen to anymore on AM but they still work.
#11

Cool design.

Similar grill design exists in several others. Zenith, I think, is one of them.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

It sure is a beauty! Congrats. Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM
Philco 91 Speaker Replacement
Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM

[-]
Who's Online
There are currently no members online.

>