Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
This is hands down the nastiest TV I've encountered, but it was local and the price was right. I wonder how many packs of smokes it took to build up that coating ? On the bright side it seems to have preserved it well. It's a really shame about the two cracks on the safety plastic screen.
[Image: https://farm1.staticflickr.com/925/43030...1b63_c.jpg]
[Image: https://farm2.staticflickr.com/1790/4299...a2ea_c.jpg]
GoJo is doing a better job that the glass cleaner.
[Image: https://farm1.staticflickr.com/918/42996...3a9e_c.jpg]
[Image: https://farm2.staticflickr.com/1828/4299...538b_c.jpg]
Steadily making progress
[Image: https://farm1.staticflickr.com/847/42996...02d3_c.jpg]
(This post was last modified: 06-27-2018, 05:48 PM by Bob Andersen.)
Posts: 204
Threads: 5
Joined: Sep 2005
City: Newark, Ohio
You have to remember that when that Philco was made, the dangers of cigarettes weren't known.... so everyone smoked.
Posts: 7,283
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 204
Threads: 5
Joined: Sep 2005
City: Newark, Ohio
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Sure, both my parents were chain smokers. I've see a lot fs sets from back then though and nothing this bad. At least it's coming off and revealing a pretty nice cabinet.
[Image: https://farm2.staticflickr.com/1763/4302...8091_c.jpg]
[Image: https://farm1.staticflickr.com/916/42355...5e83_c.jpg]
The original 17DRP4 CRT has been replaced with a 17BZP4 and it tests very good.
[Image: https://farm1.staticflickr.com/924/42355...ac1e_c.jpg]
Posts: 667
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
dollar store sells ,,some stuff,,,,called Alsome,,,for a dollar ,,,,and I mean Alsome job it does,,
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
I can't believe how cruddy that picture tube cover was. It looked like the brown color was the original finish and was coming off
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Alsome looks like a good product. I'll give it a try
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Here's another example in great condition I picked up a few years back so I knew what it should look like. Can't wait to get a closer look at the insides
[Image: https://farm2.staticflickr.com/1765/2920...9bd0_c.jpg]
(This post was last modified: 06-28-2018, 04:56 PM by Bob Andersen.)
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
I'm guessing the original owner is no longer with us.
Steve
M R Radios C M Tubes
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
I removed the front cover for cleaning and discovered a potential problem. There is a horizontal line burned into the face of the CRT. It must have been run for some time with a collapsed vertical. Just a think bright horizontal line in other words. Just how visible that will be when an image is displayed remains to be seen. Worst case scenario, I do have a spare CRT, but they don't grow on trees and I'd rather not use it if I don't have to.
[Image: https://farm1.staticflickr.com/835/29218...b7f8_c.jpg]
[Image: https://farm1.staticflickr.com/917/42186...c69b_c.jpg]
(This post was last modified: 06-29-2018, 02:24 PM by Bob Andersen.)
Posts: 7,283
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 667
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
may not notice ,,,once thee picture takes place,,,,,
Posts: 4,682
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Is it tobacco tar or kitchen grease mixed with dust? I've seen plastic radios that had about the same look to them either way, except that grease is stickier, and doesn't stink as much. I have a Deforest Crosley console that was in the house of a chain smoker, the set smelled like an ash tray for the first two years that I owned it, then faded, the chassis still has an interesting patina though.
Regards
Arran
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
I'm not sure what it is, but it's not sticky and there is an odor of cigarettes.
Last night I took a look inside and it's in pretty good shape.
I intend to do a basic power supply recap and try to power it up and get a raster. I'll complete the cleaning too now that the the CRT "head" is off.
[Image: https://farm1.staticflickr.com/834/28367...b4d5_c.jpg]
[Image: https://farm1.staticflickr.com/915/42518...91ed_c.jpg]
It's very dusty, but cleans up easily with compressed air and a damp rag.
[Image: https://farm2.staticflickr.com/1805/4251...7288_c.jpg]
[Image: https://farm2.staticflickr.com/1764/4251...94bb_c.jpg]
Here's the other end with the power supply, tuner and IF.
[Image: https://farm2.staticflickr.com/1827/4251...87cc_c.jpg]
(This post was last modified: 07-06-2018, 10:10 AM by Bob Andersen.)
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Jackson 715 not working
|
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM |
Jackson 715 not working
|
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM |
HiFi (Chifi) tube amp build - but my own design.
|
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM |
Jackson 715 not working
|
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM |
Restoring Philco 37-604C
|
Yep. F5 is green, D5 is Red.
Red is Bad.
Green is Clean.morzh — 01:30 PM |
Jackson 715 not working
|
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM |
Restoring Philco 37-604C
|
(Insert Homer Simpson "DOPF" Here.)
When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM |
Philco 91 Speaker Replacement
|
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil.
It wo...morzh — 08:44 AM |
Philco 91 Speaker Replacement
|
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM |
Philco 91 Speaker Replacement
|
As Rod said, it is OK to use a fitting speaker, and then look for an original one.
If you buy a Hammond 125 output tr...morzh — 08:15 AM |
Who's Online
|
There are currently no members online. |
|
|