Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
One before and a couple after shots of my friend Ray's completed radio. We have another radio phan now, I believe he is hooked.
Jerry
[Image: http://i303.photobucket.com/albums/nn129..._0135.jpeg]
[Image: http://i303.photobucket.com/albums/nn129..._0067.jpeg]
[Image: http://i303.photobucket.com/albums/nn129..._0068.jpeg]
A friend in need is a pest! Bill Slee ca 1970.
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
WOW!!!! What a beautiful job! That radio is absolutely gorgeous Doesn't take much to get hooked on this hobby !
Kevin
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
WOW really come out nice
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Hey.. Great job! I bet it sounds like million bucks too.
The artist formerly known as Puhpow! 8)
Posts: 5,072
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Hey, if you have any questions about it I suspect Ray will respond. He is really great at cabinet work. I still can't figure out how he fixed that disaster. He is a little shy. A man of few words. We owned a boat together in So. Cal. It had a lot of teak and moored in salt water. He would only let me do a little sanding. He put on the final coat of varnish. I just took care of the twin diesels. I'm better at that.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 1,463
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
SUPERB!!!! Glad you got another person interested as well
Gene
Posts: 9
Threads: 1
Joined: Nov 2013
City: Rio Rancho, NM
Just a note on this radio. It was headed for the junk yard when my nephew kinda as a joke dropped it off at my house. I don't know how may years it set in an outside shed, but is was well weathered and de-laminated in many places. I decided to take it on as a challenge. Now that it's finished i'm glad I did.
Ray
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Now that's talent. Great job!
I wish I could get close to doing a job like that!
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
This is a picture of a cabinet that Ray made for me for my Scott 16A. After spending a night at his house I noticed a very nice side table. Asked him if he could build one to my specs for my Scott. He also made an exact replica of the 800B for the grill cover. Sorry for the quality of the picture and my poor finish of the cabinet. Also sorry I don't seem to be able to rotate the picture. Just turn your head.
Jerry
[Image: http://i303.photobucket.com/albums/nn129...001-17.jpg]
A friend in need is a pest! Bill Slee ca 1970.
(This post was last modified: 11-18-2013, 11:20 PM by jerryhawthorne.)
Posts: 21
Threads: 3
Joined: Sep 2013
City: Caseyville Illinois
What a great job, Ray you are the best I have seen they look better than when they left the factory.
Posts: 9
Threads: 1
Joined: Nov 2013
City: Rio Rancho, NM
George, thanks much for the kind words.
Ray
Posts: 41
Threads: 12
Joined: Jan 2012
City: Cape Cod, MA
Great work!!! What model is it?
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Jackson 715 not working
|
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM |
HiFi (Chifi) tube amp build - but my own design.
|
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM |
Jackson 715 not working
|
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM |
Restoring Philco 37-604C
|
Yep. F5 is green, D5 is Red.
Red is Bad.
Green is Clean.morzh — 01:30 PM |
Jackson 715 not working
|
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM |
Restoring Philco 37-604C
|
(Insert Homer Simpson "DOPF" Here.)
When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM |
Philco 91 Speaker Replacement
|
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil.
It wo...morzh — 08:44 AM |
Philco 91 Speaker Replacement
|
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM |
Philco 91 Speaker Replacement
|
As Rod said, it is OK to use a fitting speaker, and then look for an original one.
If you buy a Hammond 125 output tr...morzh — 08:15 AM |
Philco 91 Speaker Replacement
|
Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM |
Who's Online
|
There are currently 3193 online users. [Complete List] » 2 Member(s) | 3191 Guest(s)
|
|
|
|