Posts: 4,377
Threads: 411
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
While scrolling around the Attic Archives I came across a Philco lookalike, which came first? Anyway my question is about Rola. was Rola the speaker division of Detrola? I never saw the connection with the names until tonite, I know dim pilot bulb I am.
btw beware if you go to the Detrola site frequently googled up, it is on Tripod and has many threats to your computer. i am sure they are not intentional but Norton goes wild when I hit that site.
Here is the lookalike..i have seen a Philco styled like this, I thinks.
http://www.radioatticarchives.com/radio.htm?radio=5420
Paul
Tubetalk1
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Yep looks like one of the 66-s.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 03-21-2015, 08:17 PM by morzh.)
Posts: 4,682
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Rola was just a speaker manufacturer as far as I know, much like Utah or Quam Nickels, I've seen their speakers used in a bunch of different makes and models not just Detrola. Besides that Detrola was really not a large enough manufacturer to have bought out a speaker manufacturer, or made their own. Or were you thinking that the 'rola portion of Det-rola had something to do with the speaker company? I think that ending a radio or phonograph manufacturer's name in 'olla was just something that began in the early days of gramophones and carried on longer then it needed to, like Victrola, Graphonola, Phonola, Radiola, Audiola, since Detrola sets were made in Detroit they just dropped the "it" and added "la".
Yes the styling of that set is very similar to that of a Philco 60MB or 66MB, but was likely inspired by the Philco models rather then the other way around. Philco used their own stylists that they had in house but also hired outside stylists like Norman Bel Geddes to design cabinets, Detrola may have done the latter but more then likely they just hired an outside cabinet/furniture company to design and produce the cabinets for them.
Dennis Smith (Mr Detrola) may know for sure what they did over at Detrola, he apparently had an Aunt that worked for the company hence his person interest in the history and products of the firm, but most of the small and mid sized radio manufacturers did not have their own cabinet shops and contracted out. They would go to a cabinet company and if they did not have something that was already available off the shelf the cabinet company would submit a few designs for the radio manufacturer's approval, which they would then build.
Regards
Arran
(This post was last modified: 03-22-2015, 03:50 AM by Arran.)
Posts: 4,377
Threads: 411
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Thanks for the perspecitive and info.
Paul
Tubetalk1
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Also Motorola.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,682
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
(03-22-2015, 04:01 PM)morzh Wrote: Also Motorola.
Can't forget Motorola, who's original company name was Galvin Manufacturing Company, their original line of business was to manufacture radios for cars, hence the name "Motor-ola". Then they got into portable radio equipment like for taxi cabs, and cop cars, then they developed the Handi Talky during the war. Unfortunately they were bought by Poohgle, who really knew nothing about manufacturing hardware, so they broke it up and sold off parts of Motorola to some Korean and Chinese purveyors of junk electronics, except for those parts the U.S government forbade them to sell for security reasons.
Regards
Arran
Posts: 114
Threads: 2
Joined: Jan 2014
City: Southport NC
Posts: 4,377
Threads: 411
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Jackson 715 not working
|
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM |
HiFi (Chifi) tube amp build - but my own design.
|
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM |
Jackson 715 not working
|
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM |
Restoring Philco 37-604C
|
Yep. F5 is green, D5 is Red.
Red is Bad.
Green is Clean.morzh — 01:30 PM |
Jackson 715 not working
|
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM |
Restoring Philco 37-604C
|
(Insert Homer Simpson "DOPF" Here.)
When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM |
Philco 91 Speaker Replacement
|
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil.
It wo...morzh — 08:44 AM |
Philco 91 Speaker Replacement
|
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM |
Philco 91 Speaker Replacement
|
As Rod said, it is OK to use a fitting speaker, and then look for an original one.
If you buy a Hammond 125 output tr...morzh — 08:15 AM |
Philco 91 Speaker Replacement
|
Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM |
Who's Online
|
There are currently 4650 online users. [Complete List] » 1 Member(s) | 4649 Guest(s)
|
|
|
|