Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Station Tabs - Color and Material
#1

What color were the station call letter tabs on radios like the 37-116?

What material were they made out of? Paper? Plastic? Mine is missing them entirely.

All of the current photos I've seen show beige colored tabs:

   

Contemporary ads seems to show white tabs:

   

Were they originally white and have yellowed? Or were the ad makers taking liberties with the appearance as they so often seem to do?
#2

That photo is black and white so you cant get a true color. My 38-116 that I restored has the same and it looks like the same plastic stuff that the dial is made off, I think they call it fonolic or something. I don't think you can get reproductions, you may have to make your own. I didn't bother to get mine to look new, just left them


Attached Files Image(s)
   
#3

The material may have been a slightly lighter amber than it is now, but it was certainly never white.

It's phenolic. As Fred mentioned, no one reproduces those tabs.

--
Ron Ramirez
Ferdinand IN
#4

I have used old broken dial plates and back plates. orange looking
cut and inserted them looks fine
but not all mine were missing just a few
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#5

If you have a color printer, you can choose a color a few shades lighter than what the tabs are now, and use that as a backgrounds color, and black letters of the proper font and size, and print them on an ink jet printer. After that, before you cut them out from the page, spray it well on both sides with clear, gloss polyurethane varnish. Let it dry well, and cut the tabs out. I have used this method for several radios.
#6

Yes, and the star is for an unassigned selection. The ones that were programed had call letters on them. Of course they could be set after the named setting were made.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#7

Thank you all for the info!
#8

What are the exact dimensions of these? I'd like to make them as close as possible to the originals so if anyone could provide the length x width that would be a big help!
#9

 Since you don't have one to compare or make a template from , I would pull dial off and make one that fits good and use that as template for the others.
#10

Right - well I found this very detailed picture of the tabs:

   

If I just had one of the dimensions I could compute the rest. Icon_smile
#11

Just about everyone has a Philco dial that's been washed clean and that's what I use.  For lettering I use clear matte laserjet labels and MS Word.  If you look into the fonts you will even find the star.

Pete AI2V
#12

Good job
#13

This may be too late to help you.


Attached Files Image(s)
   




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM

[-]
Who's Online
There are currently 3859 online users. [Complete List]
» 1 Member(s) | 3858 Guest(s)
Avatar

>