04-15-2015, 07:50 AM
Next problem...
I've discovered that the two 'lytics that are used in the remote section are both completely DOA. Any idea where I can find a 16uf/150V non-polarized (#95 on the schematic) (this one is a mid-production change from a 16uf/200VDC) and a 30uf/30V (#88 on the schematic) Not sure about the package on this one, whether DC or non-pol)
Got any suggestions, Ron?
I only discovered these because I got the Mystery Control powered up tonight and it works, but the stepper does not work properly, although the mechanicals of it seem to be in good shape and it steps properly if I work the ratchets manually. I'm figuring at this point that #95 will make a huge difference on how strong the main solenoid will pull in, and so it should work the stepper properly once that's replaced. The other cap is in the on/off/vol. control motor circuit.
I need to find replacements for these, and not really used to looking for these type caps.
TIA
I've discovered that the two 'lytics that are used in the remote section are both completely DOA. Any idea where I can find a 16uf/150V non-polarized (#95 on the schematic) (this one is a mid-production change from a 16uf/200VDC) and a 30uf/30V (#88 on the schematic) Not sure about the package on this one, whether DC or non-pol)
Got any suggestions, Ron?
I only discovered these because I got the Mystery Control powered up tonight and it works, but the stepper does not work properly, although the mechanicals of it seem to be in good shape and it steps properly if I work the ratchets manually. I'm figuring at this point that #95 will make a huge difference on how strong the main solenoid will pull in, and so it should work the stepper properly once that's replaced. The other cap is in the on/off/vol. control motor circuit.
I need to find replacements for these, and not really used to looking for these type caps.
TIA
