[Ron Ramirez]

Here is how the RF unit looks now - quite bare.

[Image: http://www.philcoradio.com/images/phorum...70_011.jpg]

Unsolder all 13 wires under the chassis as shown in the rough drawing I made and showed you in post #29, page 2, this thread.

Remove the bolt from the back of the RF unit.

[Image: http://www.philcoradio.com/images/phorum...70_012.jpg]

Make absolutely sure that every wire coming from the RF unit is unsoldered and loose now.

Having made absolutely sure of that, tilt the RF unit forward and then work it out by pulling it forward.

[Image: http://www.philcoradio.com/images/phorum...70_013.jpg]

Eventually, you will have it out and on your workbench.

[Image: http://www.philcoradio.com/images/phorum...70_014.jpg]

more...