05-29-2016, 05:25 PM
Yes is a 0.01 uF cap as seen below:
[Image: https://dl.dropboxusercontent.com/u/5462...903-AH.jpg]
3903-SG would be a lower melting point wax than the 3903-0SG (the O was for higher temp wax) but should have the same configuration. See Ron's post of Bakelite Condenser Data or Chuck's Bakelite Block Values page.
[Image: https://dl.dropboxusercontent.com/u/5462...903-AH.jpg]
3903-SG would be a lower melting point wax than the 3903-0SG (the O was for higher temp wax) but should have the same configuration. See Ron's post of Bakelite Condenser Data or Chuck's Bakelite Block Values page.
