[PhilcoPhan1936]

While tracing wires to reattach to the electrolytics, I referenced the schematic. There were a couple wires that were attached to one of the lugs originally, but it didn't show a connection on the schematic. See the original schematic below, followed by my correction, and the comparison to the model 66. I thought the basic form looked familiar, so I pulled the schematic to my Philco 66. I had run into trouble on that one, and was not getting voltage to the plate of the 75 tube. I submitted my query to the Antique Radio group on Facebook, and someone posted back that there was a missing "connection" dot on the schematic. I assume the case was the same on this one, so I made a correction on the schematic. I guess I'll find out when I plug it in   . The fact that I have worked on other Philcos from the same year sure helps!  

[Image: https://farm5.staticflickr.com/4363/3564...6100_b.jpg]

[Image: https://farm5.staticflickr.com/4332/3605...9b2d_b.jpg]

[Image: https://farm5.staticflickr.com/4426/3605...1280_b.jpg]