07-31-2016, 01:46 PM
#52 cap.
The 16 I have seems to be the version shown without mentioning 125-127 obes, the initial one.
http://www.nostalgiaair.org/Resources/139/M0013139.htm
The underchassis dwg is correct.
Now to #52 cap: it is shown as 7296-G which is a dual 0.05uF and 0.002uF. The sch shows only one cap, from Grid of 78 QAVC tube. The value shown seems to be 0.002uF though can't be sure it is not for #51 cap.
However the installed cap is 3903-AH.
It is not found in Chuck's table but I found a topic here
http://philcoradio.com/phorum/archive/in...d-749.html
Where Chuck says it is a dual 0.09uF cap. This does not look like what I have as mine has only 2 lugs, 1 and 5 and it checks at 20nF (resistor cut) which does notmake sense either as usually these go up in value if anything.
So, who could show me the #52 cap value? It is bolted to the side of the chassis.
The 16 I have seems to be the version shown without mentioning 125-127 obes, the initial one.
http://www.nostalgiaair.org/Resources/139/M0013139.htm
The underchassis dwg is correct.
Now to #52 cap: it is shown as 7296-G which is a dual 0.05uF and 0.002uF. The sch shows only one cap, from Grid of 78 QAVC tube. The value shown seems to be 0.002uF though can't be sure it is not for #51 cap.
However the installed cap is 3903-AH.
It is not found in Chuck's table but I found a topic here
http://philcoradio.com/phorum/archive/in...d-749.html
Where Chuck says it is a dual 0.09uF cap. This does not look like what I have as mine has only 2 lugs, 1 and 5 and it checks at 20nF (resistor cut) which does notmake sense either as usually these go up in value if anything.
So, who could show me the #52 cap value? It is bolted to the side of the chassis.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
