02-13-2017, 05:03 PM
Well Okay, I have the radio working well and rechecked the alignment. I like using the AVC for tweaking the adjustments, rather than having to listen to the speaker / voice coil tap.
So I put new speaker cloth in the cabinet and then installed the speaker and chassis. All is working well, but I see that the tuning bracket is not in there straight so it is skewed slightly to one side. I will have to remove the chassis and straighten that out sometime.
Also the shadow meter is not working yet, but I will deal with that sometime in the future.
I found that the two schematics I have here did not match the chassis very well. The chassis has 6 baketlite blocks but the schematic / parts list did not match these. Oh well, all 3 bands are working well and I plan to run this almost daily for a while.
G.
So I put new speaker cloth in the cabinet and then installed the speaker and chassis. All is working well, but I see that the tuning bracket is not in there straight so it is skewed slightly to one side. I will have to remove the chassis and straighten that out sometime.
Also the shadow meter is not working yet, but I will deal with that sometime in the future.
I found that the two schematics I have here did not match the chassis very well. The chassis has 6 baketlite blocks but the schematic / parts list did not match these. Oh well, all 3 bands are working well and I plan to run this almost daily for a while.
G.
