04-30-2017, 07:18 AM
I remember back in the navy sometimes we has circuit cards that we had to dig into clear silicone to get to the bad part.
the entire board was installed in a small box, then we used a crap load of clear silicone overtop the whole board out to the metal box perimeter. the silicone would wick the heat out to the metal case. without the silicone , the smoke would get out.
the entire board was installed in a small box, then we used a crap load of clear silicone overtop the whole board out to the metal box perimeter. the silicone would wick the heat out to the metal case. without the silicone , the smoke would get out.