05-02-2017, 07:31 AM
Something is wrong with your measurements on R100. Is is connected correctly?
One end should connect to chassis ground, the other to the can of C101 and the center tap of the power transformer. You measured a resistance of 271 ohms which is correct, but there is no DC voltage across it? That makes no sense unless it is not connected properly.
One end should connect to chassis ground, the other to the can of C101 and the center tap of the power transformer. You measured a resistance of 271 ohms which is correct, but there is no DC voltage across it? That makes no sense unless it is not connected properly.
