05-15-2017, 07:09 AM
on the upper right control knob that switches from Broadcast to SW to Phono, the linkage is in error by design.
it can only be installed two ways.
one way works until you go to sw
one way works for both shortwave and Broadcast however when you switch to PHONO, the linkage presses up directly against the dial string.
to fix grind away the metal that gets in the way to clear out the phono position.
it can only be installed two ways.
one way works until you go to sw
one way works for both shortwave and Broadcast however when you switch to PHONO, the linkage presses up directly against the dial string.
to fix grind away the metal that gets in the way to clear out the phono position.
