|
B+ too high! Two different radios.
02-17-2009, 07:50 AM
If you are reading the voltages with a Fluke meter the B+ can read higher. I noticed on most schematics for old radios that voltages were taken with a meter that had a 1000 ohm per volt loading on the circuit. I forgot what the loading characteristics of modern DVMs but it is very high and does not load the circuit. I would think your voltages ar OK.
Scott B Here's another fine mess you have gotten me into. Oliver Norville Hardy.
« Next Oldest | Next Newest »
Messages In This Thread
B+ too high! Two different radios. - by davemc - 02-08-2009, 01:24 PM
Re: B+ too high! Two different radios. - by rickd - 02-08-2009, 01:34 PM
Re: B+ too high! Two different radios. - by davemc - 02-08-2009, 02:16 PM
Re: B+ too high! Two different radios. - by codefox1 - 02-08-2009, 07:47 PM
Re: B+ too high! Two different radios. - by AI2V - 02-08-2009, 09:08 PM
Re: B+ too high! Two different radios. - by exray - 02-09-2009, 06:37 AM
Re: B+ too high! Two different radios. - by davemc - 02-09-2009, 07:07 AM
Re: B+ too high! Two different radios. - by AI2V - 02-09-2009, 09:48 AM
Re: B+ too high! Two different radios. - by Arran - 02-10-2009, 10:36 PM
Re: B+ too high! Two different radios. - by davemc - 02-11-2009, 06:58 AM
Re: B+ too high! Two different radios (SOLVED) - by davemc - 02-13-2009, 10:03 AM
Re: B+ too high! Two different radios. - by Scottb - 02-17-2009, 07:50 AM
Re: B+ too high! Two different radios. - by Texasrocker - 02-21-2009, 04:01 AM
Re: B+ too high! Two different radios. - by davemc - 02-21-2009, 07:11 AM
Re: B+ too high! Two different radios. - by Texasrocker - 02-21-2009, 10:32 PM
Re: B+ too high! Two different radios. - by exray - 02-22-2009, 08:57 AM
Re: B+ too high! Two different radios. - by Arran - 02-22-2009, 11:29 PM
Re: B+ too high! Two different radios. - by Texasrocker - 02-23-2009, 02:32 AM
Re: B+ too high! Two different radios. - by Arran - 02-24-2009, 12:19 AM
Re: B+ too high! Two different radios. - by Texasrocker - 02-24-2009, 11:26 PM
Users browsing this thread: 1 Guest(s) |
