12-05-2017, 11:03 PM
0.67uF? In circuit or desoldered? In circuit it can show anything being across the resistor.
I found the photos I took before recapping, and though it doesn't show the very end, it dives under a cap, it seems it was intended to be the GND of the 5-cap lytic, and the lytic is connected, so I probably was biting off the wires and when having reconnected the lytic I used the nearest GND lug instead. Forgot to take the wire out.
Thanks for looking anyway! It confirmed what I just found.
Unfortunately this doesn't explain my problem. My magnetic tuning no workie, and I know how it works when it works from my 37-116. Pretty efficiently.
I found the photos I took before recapping, and though it doesn't show the very end, it dives under a cap, it seems it was intended to be the GND of the 5-cap lytic, and the lytic is connected, so I probably was biting off the wires and when having reconnected the lytic I used the nearest GND lug instead. Forgot to take the wire out.
Thanks for looking anyway! It confirmed what I just found.
Unfortunately this doesn't explain my problem. My magnetic tuning no workie, and I know how it works when it works from my 37-116. Pretty efficiently.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
