02-26-2018, 08:21 PM
Use a 50/50 mix of Acetone and Lacquer thinner will wash just about any finish clean off.If you don't want to take a week to remove all the finish. Use 00 or 000 steel wool pad and slosh it on the area you want to remove it will melt it away in seconds. use a cotton cloth to wipe the excess off. Wear good thick rubber gloves and use your head * Don't SMOKE * 
lay down some plastic drop cloths to protect the surface where your working on and if you have a plastic tub bigger than the radio you can collect the excess to reuse it. Here some pics of a Sparton cabinet i used the mix on.
lay down some plastic drop cloths to protect the surface where your working on and if you have a plastic tub bigger than the radio you can collect the excess to reuse it. Here some pics of a Sparton cabinet i used the mix on.