01-28-2019, 12:32 PM
Great info Ron.
I note also that the earliest schematic has a volume pot of 0.35 Meg as opposed to the 2 Meg control of the later schematics. Also differences in the resistor (Part no. 56) connected to the wiper.
Somewhere, in the paperwork I bought from Chuck Shwark, are detailed some service notes, including recommended changes. One of these detailed mods to the tone control. I will try and find these, as it is always possible that sets were changed after leaving the factory.
Cheers,
Ed
I note also that the earliest schematic has a volume pot of 0.35 Meg as opposed to the 2 Meg control of the later schematics. Also differences in the resistor (Part no. 56) connected to the wiper.
Somewhere, in the paperwork I bought from Chuck Shwark, are detailed some service notes, including recommended changes. One of these detailed mods to the tone control. I will try and find these, as it is always possible that sets were changed after leaving the factory.
Cheers,
Ed
I don't hold with furniture that talks.
