11-11-2005, 08:55 PM
Hi Flashback
From your description, it sounds like the dual bias resistor has died. This resistor has two sections of 70 ohms each.
While you're inside, check the very large resistor also under the chassis. Its value is 8300 ohms, and these resistors are usually bad.
You should obtain a copy of the service information for this set. I can get you started with a schematic:
http://www.philcoradio.com/tech/images/95e.jpg
http://www.philcoradio.com/tech/images/95.jpg
but you really need the under-chassis view so you will know which part goes where. I suggest you visit here to obtain the complete service info for your set at a modest price:
http://www.philcorepairbench.com/schematics.htm
Good luck.
From your description, it sounds like the dual bias resistor has died. This resistor has two sections of 70 ohms each.
While you're inside, check the very large resistor also under the chassis. Its value is 8300 ohms, and these resistors are usually bad.
You should obtain a copy of the service information for this set. I can get you started with a schematic:
http://www.philcoradio.com/tech/images/95e.jpg
http://www.philcoradio.com/tech/images/95.jpg
but you really need the under-chassis view so you will know which part goes where. I suggest you visit here to obtain the complete service info for your set at a modest price:
http://www.philcorepairbench.com/schematics.htm
Good luck.
--
Ron Ramirez
Ferdinand IN
