01-13-2014, 09:24 PM
I am reforming the first one. I found the article on reforming the exact caps I have. I am not following it directly as I do not have the dry battery and switch, but I am applying 180v ( film forming voltage for these is 160 to 200V) via 100K resistor, and I create the voltage with a bridge rectifier from Variac fro isolation transformer.
The voltage on the resistor is about 27v and so far has settled. I hope it will go down. 0.27mA is lots of leakage.
PS. Started mo ing dow more.
The voltage on the resistor is about 27v and so far has settled. I hope it will go down. 0.27mA is lots of leakage.
PS. Started mo ing dow more.
