Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi All
I just inherited a Phillips Jupiter 543. I need two of the white buttons at the bottom of the dial. And is there English info on this radio? I found a German schematic. It works but the little wheels in the dial string sustem have frozen and will not turn. Can anyone help me on this it has two speakers and sounds pretty good but need to recap it.
Joe
Joe Bratcher near Louisville, KY
Posts: 4,612
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
If the Phillips is new enough it may not need new caps, many of the units from the late 1950s onward used mustard yellow capacitors that had plastic film inside. Do you have a photo of this set?
Regards
Arran
Posts: 15,305
Threads: 530
Joined: Oct 2011
City: Jackson, NJ
Devices of 50s and up only need electrolytics replaced and even that only in case they dried up.
Posts: 4,336
Threads: 407
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Photos, yes pls. Love to see it.
Paul
Tubetalk1
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi All
Sorry about the quality of the pictures but I got in a hurry. This is what I have. The push button knobs I need shows in the pictures. Can anyone help? The set works pretty good but the little wheels that the dial string uses are frozen and will not turn so I have some work to do. But I always wanted a german radio so now I have one
. The cabinet needs to be cleaned to see what is to be done. Thanks for the interest
. Joe
[Image: http://i927.photobucket.com/albums/ad118...236dd5.jpg]
[Image: http://i927.photobucket.com/albums/ad118...7fdf2c.jpg]
[Image: http://i927.photobucket.com/albums/ad118...506dee.jpg]
[Image: http://i927.photobucket.com/albums/ad118...ac0b0b.jpg]
[Image: http://i927.photobucket.com/albums/ad118...e7aea8.jpg]
[Image: http://i927.photobucket.com/albums/ad118...c4d255.jpg]
Joe Bratcher near Louisville, KY
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Hi Joe:
I have worked on a many of the German sets and a common problem is the AM tuning cap is the one that is seized. I would check that as it is rare that all the little wheels would seize up and most times the string will just slide anyways.
Good luck with this one and once you have it working they sound great!
Gregb
Posts: 4,612
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
It's a Dutch company actually, even though it may have been made for the German or Austrian market. In my experience Phillips sets are better designed and better made then the typical German brands. It's likely that the only parts that will need replacement will be the electrolytics, and maybe some tubes, I don't see any of the black types made out of molded tar under that chassis .
Regards
Arran
