07-15-2014, 06:50 PM
A technical question for you guys. A previous repair has replaced the #42 280 ohm wire wound resistor (Part No. 33-128431) with a 10 watt 250 ohm resistor. They also replaced the # 43 70 ohm 1/2 watt resistor with what looks like another 10 watt replacement. Probably OK but it sure is ugly. I'm replacing the 70 ohm with a correct reproduction. Any suggestions on what to do with replacing the 280 ohm? I have a much smaller 5 watt 300 ohm part that would be easier to hide but I'm not sure of what wattage I can actually use. Anyone have specs on the original part or an assessment of the wattage required? Thanks!!
[Image: https://www.dropbox.com/s/e7anw9z01323sf....jpg?raw=1]
[Image: https://www.dropbox.com/s/g5tw19ucly5z5y....jpg?raw=1]
[Image: https://www.dropbox.com/s/e7anw9z01323sf....jpg?raw=1]
[Image: https://www.dropbox.com/s/g5tw19ucly5z5y....jpg?raw=1]
