04-06-2014, 06:59 AM
Yeah, it stays lit no matter what position the function switch is in - Tape Head, Phono, Aux, any of the three FM positions...it stays lit. And, yes, I did use the same circuit for LED replacement as I used in the 440-T and 4400.
[Image: http://www.philcoradio.com/images/phorum.../led02.jpg]
The only difference is, there is a 2.7K resistor connected from the positive terminal of the 200 uF capacitor in the drawing above to ground in the 700-T.
I have the MPX board out and have partially recapped it. I'm not going to reinstall it until I order and receive those 27 uF electrolytics.
[Image: http://www.philcoradio.com/images/phorum.../led02.jpg]
The only difference is, there is a 2.7K resistor connected from the positive terminal of the 200 uF capacitor in the drawing above to ground in the 700-T.
I have the MPX board out and have partially recapped it. I'm not going to reinstall it until I order and receive those 27 uF electrolytics.
--
Ron Ramirez
Ferdinand IN