Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 71 Code 121
#1

This chassis was found in my dad's basement and has been in my attic for 13 years. Would like to find an original cabinet if possible and also looking for a replacement speaker.
I cannot determine what cabinet this came out of based on the panel on the front.
Would like suggestions of where to find a cabinet and also a replacement speaker.
Thank you


Attached Files Image(s)
               
#2

Welcome to the Phorum!

Once you get some help to decide what parts you’re after please post a separate wanted thread in the ‘Wanted’ section.
#3

The speakers for the 71 depend on the cabinet you put the chassis in.  See the spreadsheet at https://philcoradio.com/library/index.ph.../speakers/ for info.

The cabinets that the 71 chassis came out of are seen in the various 71 models in the Gallery at https://philcoradio.com/gallery2/1932b/
#4

Hi and welcome,

You could also post over on ARF and see if that produces anything. Mostly be vigilant. Check CL, Facebook Marketplace sometimes can turn up some gems. Ebay, there maybe radio clubs that meet in your area.
Condition can also play a big role in what you may get. Some have the tools and skill sets to do refinishing and cabinet repairs. Other what a cabinet they can slide their chassis in and it's good to go.
Generally the consoles go cheap even in good condition. The 71B or baby grand aka cathedral would probably the most expensive/desirable of them all. The 71LZ is a chairside but the chassis is mechanically setup different than yours. Won't work with a lot of extra parts.

GL

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

The sticker says "Chassis 71, Code 121" so it was a single speaker radio, either cathedral or console.

If you would like to turn your chassis into a nice cathedral check here:
https://philcoradio.com/davis/index.html

--
Ron Ramirez
Ferdinand IN
#6

Hello and welcome! While you search for a suitable cabinet, I would suggest this is the time to re-cap and re-carbon the chassis which is a necessity for the radio. Do you have the speaker for this chassis? There might be a second search. Explore this Phorum in depth. Plenty of friendly help and information is available here. Good luck in your hunt. Take care and BE HEALTHY! Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM

[-]
Who's Online
There are currently 2720 online users. [Complete List]
» 1 Member(s) | 2719 Guest(s)
Avatar

>