Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1209 phono help
#1

oops hope this better are a D-10 and a D-10A record players interchangeable in a philco 46-1209 david
#2

David

please re-read your post and correct it. As it stands it is very confusing.
#3

corrected i hope sorry david
#4

D R Ford, as far as I know they both use the same power connection and the same audio connection, trough the same transformer. I might be wrong, but as far as interchangeable go, you could connect an MP3 player or a cellphone to the phono input of your radio and it would work. The D-10 and D-10A have the same footprint (AFAIK) and their only difference would rely in the reproducer.

I personally gave up on the one from my 47-1230 and sent it to another phorum member for his. But I am in the younger bunch who never really used 78 rpm records so I do not think I count.

-Mars




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently 5907 online users. [Complete List]
» 1 Member(s) | 5906 Guest(s)
Avatar

>