Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Aria radio Schematics
#1

Hi, I just found a small tabletop Aria Radio. I know that this radio name was made by several manufacturers prior to the war. It has model 543 hand written on the bottom of the cabinet but other than that no indications. I also spent 3 days looking on Nostalgia Air at all manufacturers for models 543. I found one close to the tube line up. My radio has 80, 6A7, 6K7, 6Q7G, and the last tube is missing which I suspect to be 6f6. The closest one I found was made by Stewart Warner, Its line up is 5w4G, 6a8G, 6k7, 6Q7G, 6F6G. Does anyone have any help here so I get off to the right start. This thing has such a cool wood cabinet in great shape.

By the way, my radio has what I believe to be the antenna coil on top of the chassis and not protected other than a wax coating and the wires from it run to the back of the chassis and are cut off there. Looking at the label that has the handwritten model number on it, it makes me wonder it this was not a experimental model.
#2

It has to be posted in Other radios. This is a Philco thread.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Pic's ???

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#4

Sorry about the question. I thought that because it was a no name it could possibly be related to Philco. I didn't mean to violate the rules. As far as pics, I haven't figured out how to upload pics here. If someone can tell me how I will for future things related to Philco. Also, I will not continue this thread because I want to honor the forum. It has been a help to me.
#5

Don't sweat it. You might read this about posting pictures.
http://philcoradio.com/phorum/showthread.php?tid=29
#6

No worries Radio Hound, we simply moved the thread. Hope you find the schematic or at least get an ID.
#7

Hello hound!
 Here is a link to a website that has a search engine by tubes.
This is what I found under the tubes you have. A 41 seems to be popular for the 5th tube. 
http://www.grillecloth.com/sylvania/tube...ubmit&db=5


Here are some pics from another site. Icon_smile

http://www.radiomuseum.org/dsp_treffer.c...rt=&Page=2

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

Well, Oldrestorer you helped me figure it out. It was the Sentinal 148A. What threw me off was the handwritten model number on the bottom. When I saw your chart I looked for those model numbers all over the chassis and found a tiny stamp in the chassis that had 148A (barely visible). When I looked this schematic up, it was a exact match. Thanks again.
#9

Here is a look at the radio identified as a 148A

[Image: http://i1036.photobucket.com/albums/a446...xezmya.jpg]

[Image: http://i1036.photobucket.com/albums/a446...k5t4ev.jpg]




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently 2513 online users. [Complete List]
» 1 Member(s) | 2512 Guest(s)
Avatar

>