Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 41-295 Volume Drop After Cleaning Pots
#1

Recently I successfully recapped a model 41-295. After cleaning the tone control and volume control with a cleaner/lubricant and letting it sit overnight, the radio has had a drop in volume. There is no crackling or static. Everything sounds quiet and runs smoothly, but there's a significant loss in volume. I gave the pots each two shots of spray cleaner lubricant. I am wondering if I sprayed too much material in the pots. Could that have caused a problem? I've replaced all the bad tubes after checking. Can you help me out?

Thanks,

Dave
#2

Kinda doubt it. Just cleaning the controls shouldn't have that affect on the set. Double check for something that might be loose or have a bad connection. Did the tone of the set change from before to after the cleaning? Looks like the volume control is 4megs w/ a tap for the tone control. You could measure it to see if there is a problem.
Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 80 Antenna Issue?
You are kind of on the right path. You can touch the grid cap of the Detector/Oscillator 36 tube. I'm expecting a respon...RodB — 08:48 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Welcome to the Phorum, PittsburghToast!  I found an old thread that my interest you regarding the quality and worth of P...GarySP — 08:48 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Welcome to the Phorum! :wave: We do not have anything on that unit in our digital library. There is a Sam's Photof...klondike98 — 08:47 PM
Model 80 Antenna Issue?
I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the re...Hamilton — 08:24 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Hi there! this is my first time posting. I recently picked up this Ford-Philco Console record player and radio at a yard...PittsburghToast — 07:28 PM
philco predicta
I found that where I have the 140v B+ there is 50v and the tuner receives 235v through the orange cablecgl18 — 04:14 PM
Philco 91 code 221
Chassis grounds thru rivets is another good place to look. Oh and the stator screws on the tuning cap where the leads at...Radioroslyn — 08:11 AM
Philco 91 code 221
Dirty tube pins and socket, cold solder joint, stray tiny strand of wire, clean the entire area around the oscillator tu...RodB — 08:43 PM
Philco 91 code 221
I have been restoring one of these sets and switched it on yesterday. It didn't exactly spring into life, but after a co...Philconut — 08:26 PM
Philco 50-925 antenna connections
That's super. Glad to hear you figured it out. Paul.Paul Philco322 — 11:11 AM

[-]
Who's Online
There are currently 1227 online users. [Complete List]
» 1 Member(s) | 1226 Guest(s)
Avatar

>