Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

116PX back?
#1

I have been restoring my 116PX. Just finished the clarifiers and was wondering, did this model or any of he models with clarifiers have backs like the older pan chassis Philcos, 111, 112, and 15x's to name a few. If not, did Philco plan on the radio being against a wall? I guess I should know how the clarifiers are suppose to work. I know they are passive, but what makes them work if no pressure from the speaker is captured in a chamber?
#2

The clarifiers are really passive dampers not radiators.They were used to reduce the cabinet resonance at specific bass frequencies. Each clarifier had a strap of lossy damping material fastened to the cone. The resonant freq of each clarifier corresponds to a cabinet resonant peak, so each acts a tuned trap, reducing the amplitude of the associated peak and therefore providing a smoother bass response.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM

[-]
Who's Online
There are currently 1251 online users. [Complete List]
» 2 Member(s) | 1249 Guest(s)
AvatarAvatar

>