Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Aligned the set.
The procedure is well-hidden, but I unearthed sometging from the 89 Rider article.
Very simple alignment. Just IF (3 padders) and 1500 kHz. The lower frequency just aligned itself.
Now have to put it back together and clean up the exterior a bit.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 09-01-2020, 08:45 PM by morzh.)
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
You're standing on your head to take that pic!
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
:
No. This is the way it is, the chassis is for the LZ so it is oriented this way so when itis horizontal, the wheel is upside down.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
So far so good Mike 
Looking forward to a picture when it's back in the cabinet...
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
"This is the way it is, the chassis is for the LZ so it is oriented this way so when itis horizontal, the wheel is upside down."
That's right, it's a chair side. Duh!
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
I took the picture of what I saw while giving the chassis one last look:
Remember when I said this chassis is ...tight?
Yes. This tight. The first cap of the tone control is practically touching the grounded electrolytics mounting bracket. And the voltage there is the plate voltage. Safe, as all it would result in is the first cap getting engaged. But....so I had to bend it out. It is possible the bracket got moved a bit when put back in place. Still too close.
Anyhow, I put back the rear cover to the speaker cabinet and gave it a GoJo bath.
I also sprayed the asbestos-lined metal screen with hi-temp finish, same I did for the Transoceanic.
Tomorrow hopefully I could reassemble the chassis into its cabinet, give the cabinet a GoJo bath, and it should be over then.
I have to say, it sounds really good. Not 38-690 good, but really, really good.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 09-02-2020, 09:03 PM by morzh.)
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Well. I gave the radio cabinet GoJo wipe.
I made some pictures, but this is with the tablet and not a very good lighting.
This said, of course, the radio cabinet could use refinishing, though the speaker cabinet is fine the way it is. Not ideal but it looks decent to be preserved.
The sound is good. I like it. I took it out from my workshop to put with the general population. Too bad the space in my basement starts shrinking, and I do not think my wife wants it upstairs.
It will have to live in the basement for now.
It is no longer upside down.
This concludes it for now.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 09-03-2020, 09:00 PM by morzh.)
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Looks good Mike
They're survivors and a few blemishes here and there after all they've been through can be overlooked.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 1,523
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
Excellent work, Mike! There's too much good finish left to merit refinishing. Leave those "battle scars of a bygone era" intact...it gives it some extra character!
Greg V.
West Bend, WI
Member WARCI.org
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
My thought exactly.
I wish I had some sort of account somewhere that allows videos. Unfortunately U-toob is no longer an option.
This is one good sounding radio.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
trying to identify this wire type
|
| The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
|
trying to identify this wire type
|
| Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
|
Philco 60 Squealing
|
| All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
|
Philco 60 Squealing
|
| I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
|
Philco 46-420 Code 121 Reception issues
|
| Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
|
Philco 46-420 Code 121 Reception issues
|
| You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
|
Philco 42-1008 conversion kit
|
| Interesting. I haven't seen that before.klondike98 — 07:02 PM |
|
12' Philco
|
| Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
|
Shadow Meter Bulb
|
| Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
|
Shadow Meter Bulb
|
| Ok. Thanks for the correction.RossH — 03:09 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
